An Innovative Debagging Station
to Save Time and Money for Users of Powder and Bulk Solids |
If you use powders or bulk
solids in your operation, Griffin Environmental's Dustless Debagger can save you
time and money while keeping your air clean. This self-contained unit is both a
fast, efficient debagging station plus a complete dust control system. Designed
by our experienced engineers and backed by over 40 years of know-how in the air
pollution field, it is ruggedly built for years of service.The Dustless Debagger is
made of heavy duty welded construction. Small and compact in size, it is 99%
plus efficient. There is a choice of three bag cleaning methods: manual shake,
motorized shake, and pulse jet.The filter bags and cleaning
mechanism are accessible from grade level. Filter bag replacement is fast and
easy through a rear door opening. Blower fan is top mounted or, as an option,
side-mounted.Because of its small size
and relatively lightweight, the debagger can be easily transported. It is
shipped as two components, with bags installed, for convenient field
assembly. |
 |
|
 |
When dropped on
the recessed grating, the bag is split in half by the knives. There is no strain
or reaching by the operator and, as there are no overhead obstructions, a hard
hat need not be worn. The material falls into the hopper and the lighter,
airborne particles are drawn upward and collected on the bags.
|
Your Choice of Three
Bag Cleaning Methods
1. Manual Shake -
18 BDM
A
manual shaker bag dump station is used primarily for intermittent duty where
only periodic bag dumping is required. A hand crank is provided for manual bag
cleaning once fan is shut off. A limit switch is provided for automatic
activation of fan motor. User provides 115V/1ph/60hz
electrical power for all electrical components.
2. Motorized Shake - 18 BDA
The motorized shaker bag dump station is used
for continual bag dumping, where only momentary shut down for bag cleaning is
allowed. A limit switch is provided for automatic activation of fan
motor.Option - Control panel for
automatic activation of shaker motor is available. Activation is accomplished
when bag dump door opens and starts the fan. Closing the bag dump door stops the
fan and energizes the bag cleaning cycle which operates for one
minute.User provides 115V/1/60
electrical power for all electrical components.
3. Pulse Jet - 18 BDP
The pulse jet bag dump station is designed
for continuous bag dumping where shut down is impractical.A limit switch is provided
for automatic activation of fan motor and pulse controls.The control panel is
supplied and includes two variable timers. One controls the duration of pulse
and the other controls the interval between pulses.The user provides compressed
air for operation of the cleaning cycle, 115V/1ph/60hz electrical power for
electrical controls, 230-460V/3ph/60hz for fan motor.
Customization
- The Griffin Dustless Debagger is available in
stainless steel or other special alloys.
- Sanitary smooth finishes are available for food
grade applications.
- HEPA filters and silencers can be provided on the
outlet of the fan. As an additional option, the blower can be
side-mounted
- For use as a baghouse pre-coat system, larger
storage hoppers and rotary airlocks can be supplied.
- Special coatings are available.
- Special motors are also available.
- Optional motor starters and wiring.
|
 |
View from the back with door opened shows manual and
motorized shaker mechanism
and dust collector bags.
|
|
|
