Jonathan
Vect-Aire Downflow Collector
This is performance and reliability in a compact package that fits anywhere. But installation flexibility isn't the only benefit of Griffin's cartridge collectors. They also deliver high filtration efficiency with minimal pressure drop. And with true down flow operation and vertically mounted filters, there is less dust re-entrainment. As a result, our Vect-Aire collectors are ideal for in-plant dust and product recovery.
Like all of our dust collection systems, these units are built to be exceptionally rugged and ready to stand up to heavy-duty use. With a wide range of options, they'll bring you the flexibility to meet your application needs.
Design Features
- 10 standard models
- 100 cfm to 20,000 cfm
- Media area from 70 sq.ft. to 12,000 sq.ft.
- Housing and hopper constructed of continuously welded HRS
Vect-Aire Flow Pattern
- From entry to discharge, dust always travels downward between vertical cartridge filters, never impeded by counter flowing air.
- Light dust particles are collected on outer cartridge surfaces while heavier particles are driven downward to hopper.
- Unlike horizontal cartridges, vertical filters are uniformly effective over the entire surface.
- Venturi assisted jet pulse cleaning assures minimum recapture of dislodged dust during cleaning cycle.
- Dust entering at the top of the collector won't disturb dust already settled in the hopper.
Nomex® - Registered trademark of Dupont
Top Load Cartridge Collectors
Griffin’s Top Load Cartridge Collectors bring efficiency and economy to dust collection. Designed for easy installation, operation and maintenance, Griffin’s TLC series is a flexible answer to a variety dust collection and product recovery concerns. These pulse jet filter vents provide continuous fabric filtration for extended periods. And without internal moving parts, maintenance is kept to a minimum.
Like all of our dust collection systems, these units are built to be exceptionally rugged and ready to stand up to heavy-duty use. With a wide range of options, they'll bring you the flexibility to meet your application needs.
| If our standard models and options don't meet your needs, we'll design a collector that will. |
Design Features
- Housing: Continuously welded Hot Rolled Steel (HRS)
- Filter Area: 234ft² – 555ft²
- Pressure: standard design for +/-20”W.G.
- Standard Cartridges: 12-3/4” diameter x 30” tall
Efficient Performance
Less Downtime
Pulse technology allows continuous filtration over extended periods.
Balanced Design
The header pipe acts as a counter-weight to assist opening access hatch
Maintenance
Minimal Maintenance
Without internal moving parts, maintenance is kept to a minimum.
Maintenance Friendly Design
Units designed for faster and easier cartridge replacement: simply remove the swing-bolts, open the roof, loosen the hold-downs, and replace the cartridges.
Design Features
- Four standard models available, all with a hinged top access door for cartridge removal
- 12-3/4" Dia. x 30" Cartridges with 80/20 cellulose polyester or spun bond polyester media (other sizes and media also available)
- Standard units designed for -20" W.G.
- Housing constructed of continuously welded HRS
- Control panel in NEMA 12 4 enclosure standard for all TLC models-shipped loose for field mounting
- Magnehelic gauge with mounting bracket shipped loose
Accessories
- Fans – available as required, suitable for grade level or side mounting on collector
- Barrel hopper assembly – standard 60 degree slope with flanged discharge and support legs
- Other accessories – elevated walkway, railing, ladder, slide gate, rotary air lock, insulation, companion flange, bird screening, roof adapter
Horizontal Load Cartridge Collectors
Easy to install, operate, and maintain, Griffin’s PHEONIX-Series Horizontal Load Cartridge collectors are an economical solution for dust and product recovery applications. With convenient side filter removal and greater filter efficiency, the Pheonix-Series Cartridge Collector makes an economical solution for indoor installations with low overhead clearance. The Pheonix series is available in a wide range of sizes and suitable for a wide-range of applications, big or small.
Like all of our dust collectors, these collectors are built to be exceptionally rugged and ready to stand up to heavy-duty use. With a wide range of options, they offer the flexibility to meet your application needs.
| If our standard models and options don't meet your needs, we'll design a collector that will. |
Design Features
- Housing / Hopper: Continuously welded HRS construction
- Filter Area: 138 ft² – 32,512 ft²
- Pressure for Standard Design: +/- 20” W.G.
- Standard Cartridges: 13-7/8” diameter x 26” long
Efficient Performance
Greater Efficiency
Requires no cage and uses fewer filters with greater efficiency
Less Downtime
Pulse technology allows continuous filtration over extended periods.
Designed for Convenience and Ease
Side filter removal makes the Pheonix suitable for indoor installations with low overhead clearance.
Maintenance
Easy Access Means Less Maintenance Time
Side-removal cartridges give easy access for faster changing
Monitor Baghouse Performance
A provided Magnehelic Gauge allows you to read the differential pressure across the bags. This helps operators identify an issue before it causes serious damage.
Minimal Maintenance
Without internal moving parts, maintenance is kept to a minimum.
Versatile and Efficient Operation
- Dust laden air enters the collector through the top of the housing.
- An internal baffle distributes the dirty air within the housing, reduces air velocity, and protects bags from direct impact from abrasive dust for longer bag life.
- Heavier particles drop past the filters into the hopper while lighter particles collect on the outside surface of the filters.
- Filtered clean air flows to the clean-air plenum and exhausts through the outlet.
- Periodic compressed-air pulsing removes accumulated dust from the elements with cleaning frequency and duration adjusted by solid-state timer.
- Dust falls into the hopper for removal by airlock or slide gate.
Basic Features
- Stock Exterior paint colors include tan, white, gray and blue. Custom paint available.
- Mild steel construction.
- Structural support steel for 5’ discharge clearance.
- Easy access side-removal cartridges.
- Magnahelic differential pressure gauge.
- Standard filters are 8 oz. Spun-bond polyester or 80/20 cellulose/polyester blend.
- 20” W.G. construction standard.
- 90 MPH wind load design for supports.
- NEMA 4 enclosure for continuous pulse cleaning, factory installed and ready for field wiring connections.
Accessories / Options
- Fans: Available as required, suitable for grade, roof, or side mounting on collector.
- High Side Inlet: Standard inlet is on roof of unit. High side wall inlet option available.
- Discharge Valves: Rotary airlock, slide gate, drum cover, or screw conveyor discharge equipment.
- Explosive Designs: NEMA 7/9 electrical enclosure, equipment grounding, and pressure relief devices available.
- Special Construction: Stainless steel or galvanized steel housing and components.
- Instrumentation: Differential pressure switches/transmitters, temperature indicators/transmitters, level indicators, etc.
- Bag-In / Bag-out Kit: For handling filter change-out on hazardous material applications.
High Temp Ceramic Baghouse
HIGH TEMP FILTER
Griffin’s answer to high temperature FILTER applications, the Nova series can withstand tempures up to 1650°F — more than 1000°F over the conventional temperature limit of dust collectors.
With several unique features incorporated into its design, the Nova series minimizes thermal stress while protecting the jet pulse from extreme heat. Its high temperature threshold makes the Nova an efficient solution for Hot Gas Clean Up (HGCU) Applications as well as a variety of other applications that require a higher-than-average temperature.
Each Nova High Temp Filter is custom made, but the following information reflects the most common data from the units produced by Griffin Filters.
Heavy-Duty Construction
- Pressure: -20”WG is standard.
- Housing: constructed with 316 stainless steel for thermal stress and corrosion resistance
- A cylindrical housing provides uniform heat expansion
- Stainless steel blowtubes are included for corrosion resistance
- Support legs designed for heat expansion
Efficient Design
Less Downtime
Pulse technology allows continuous filtration over extended periods.
Increased Efficiency and Resistance
Ceramic filter elements have high efficiency and they resistant to sparks, thermal shock, fire, acids and alkalis (except HF).
Maintenance
Designed to Minimize Maintenance
Without internal moving parts, maintenance is kept to a minimum.
Accessories
- Fans – available as required, suitable for grade level or side mounting on collector
- On-line demand cleaning
- Other accessories – elevated walkway, damper, railing, ladder, insulation
Options
- Explosive conditions – NEMA 7 or 9 control panels, NEMA 7 or 9 solenoid enclosures, pressure relief devices, electrical grounding
- Special discharge clearance
- Pressure gauges and switches – combination differential pressure switches/gauges, differential pressure switches
- Seismic and wind load considerations
Cylindrical Filter Receivers
Easy to install, operate, and maintain, Griffin's cylindrical filter dust collectors are an efficient economical solution to dust and product recovery. These pulse jet units provide continuous fabric filtration for extended periods. And without internal moving parts, maintenance is kept to a minimum.
Like all of our dust collection systems, these units are built to be exceptionally rugged and ready to stand up to heavy-duty use. With a wide range of options, they'll bring you the flexibility to meet your application needs.
| If our standard models and options don't meet your needs, we'll design a collector that will. |
Construction for Higher Pressure
- Housing / Hopper: continuously welded hot rolled steel (HRS) construction
- Pressure for standard design: -100”W.G. for collectors up to 62" diameter
- Cloth Area: 31 ft² – 2,023 ft²
Efficient Design
Versatility for Your Convenience
Cylindrical Filter Dust Collectors are available in both top- and bottom-load designs.
Greater Efficiency
Cylindrical dust collectors can use fewer filters and have greater efficiency due to increased internal pressure.
Less Downtime
Pulse technology allows continuous filtration over extended periods.
Maintenance
Minimal Maintenance
Without internal moving parts, maintenance is kept to a minimum.
Convenient Bag Access Points
Standard Cylindrical Filter designs include both bottom and top bag access. Better access makes changing the bags easier and faster.
Design Features
- 56 standard models available.
- Available with nominal 4" or 6" diameter filter bags.
- Housing and hopper constructed of continuously welded HRS.
- Control panel in NEMA 4 enclosure standard for all Cylindrical Filter models—shipped loose for field mounting.
Accessories
- Fans – available as required, suitable for grade level, side or top mounting on collector
- Material deflector – includes tangential inlet with inertial separator to force heavier particles downward
- Hopper – standard 60° slope with flanged discharge
- Other accessories – elevated walkway, railing, ladder, slide gate, rotary air lock, insulation, support steel, safety grating
Options
- ASME pressure vessel design available
- Explosive conditions – NEMA 7 or 9 control panels, NEMA 7 or 9 solenoid enclosures, pressure relief devices, electrical grounding
- Special construction – stainless steel or special alloy steels
- Sanitary finishes – available for food grade applications
- Special surface finishes – sand blasting and epoxy coating
- Top bag removal
- Pressure gauges and switches – combination differential pressure switches/gauges, differential pressure switches
- Filter media – singed polyester felt is standard. Nomex®, polypropylene, fiberglass, acrylic and Ryton® also available.
- Filter media finishes – PTFE membrane, acrylic, glazing and other acid resistant finishes also available.
Nomex® - Registered Trademark of Dupont
Ryton® - Registered Trademark of Phillips Petroleum Co.
Jet Vent Dust Collectors
Easy to install, operate, and maintain, Griffin's Jet-Vent dust collectors are an efficient, economical solution for dust and product recovery. These pulse jet filter vents provide continuous fabric filtration for extended periods. Available in a wide-range of sizes, the Jet-Vent is one of Griffin's most versatile dust collectors.
Like all of our dust collection systems, these units are built to be exceptionally rugged and ready to stand up to heavy-duty use. With a wide range of options, they'll bring you the flexibility to meet your application needs.
| If our standard models and options don't meet your needs, we'll design a collector that will. |
Jet-Vent's Heavy-Duty Construction
Griffin’s standard models are built to perform under the harshest of conditions, but if your needs require different materials, we will be happy to work with you suit your needs.
The engineers at Griffin have designed our standard Jet Vents for heavy-duty jobs:
- Housing / Hopper: continuously welded hot rolled steel (HRS) construction
- Pressure for standard design: -20”W.G.
- Cloth Area: 29 ft² – 3,164 ft²
Efficient and Economical Performance
Less Downtime
Pulse technology allows continuous filtration over extended periods.
Control Air Consumption
A Pulse Jet Timer lets the operator control the compressed air consumption for the cleaning cycle.
Maintenance
Less maintenance time
Bag removal from a side-access door means faster bag replacement and less maintenance time.
Designed to Minimize Maintenance
Without internal moving parts, maintenance is kept to a minimum.
Design Features
- Over 31 standard models available
- Available with nominal 4" or 6" diameter filter bags
- Modular design for unlimited airflow
- Standard units designed for -20" W.G.
- Housing and hopper constructed of continuously welded HRS
- Control panel in NEMA 12 4 enclosure standard for all Jet-Vent models-shipped loose for field mounting
- Standard bag removal is from the side access door
Accessories
- Fans – available as required, suitable for grade level, side or top mounting on collector
- Barrel hopper assembly – standard 60 degree slope with flanged discharge and support legs
- Other accessories – elevated walkway, railing, ladder, slide gate, rotary air lock, insulation, safety grating, companion flange, bird screening, roof adapter
Options
- Explosive conditions – NEMA 7 or 9 control panels, NEMA 7 or 9 solenoid enclosures, pressure relief devices, electrical grounding
- Special construction – stainless steel or special alloy steels
- Sanitary finishes – available for food grade applications
- Special surface finishes – sand blasting, epoxy and other coatings
- Pressure gauges and switches – combination differential pressure switches/gauges, differential pressure switches
- Filter media – singed polyester felt is standard. Nomex®, polypropylene, fiberglass, acrylic, and Ryton® also available
- Filter media finishes – PTFE membrane, acrylic, glazing and other acid resistant finishes also available.
- Pleated filters
Nomex® - Registered Trademark of Dupont
Ryton® - Registered Trademark of Phillips Petroleum Co
Jet-Aire Baghouses
Pulse Jet Baghouse Dust Collection. Griffin's Jet-Aire Dust Collectors are an effective solution to an array of solids processing and product recovery projects. Built as a stand-alone unit, or as modular construction for unlimited airflow, these Pulse Jet Baghouse Dust Collectors can perform under the harshest conditions. Every Griffin unit is built to last, and with a mind for maintenance, Griffin's Jet-Aire Pulse Jet Baghouse Units will minimize downtime while maximizing long-term savings.
| If our standard models and options don't meet your needs, we'll design a collector that will. Let Us Know Click Here |
Jet-Aire's Rugged Construction
Griffin's standard models are built to perform under the harshest conditions, but if your needs require different materials, we will be happy to work with you to suit your needs.
- Hopper / Support Steel: 12 Gauge Hot Rolled Steel (HRS) welded construction.
- Tubesheet: 10 Gauge
- Pressure for standard design: -20"W.G.
- Temperature limit for standard design: 280° F
- Cloth Area: 720 ft² - 15,456 ft²
Efficient & Economical Design
Less Downtime
Pulse technology allows continuous filtration over extended periods.
Control Air Consumption
A Pulse Jet Timer lets the operator control the compressed air consumption for the cleaning cycle.
Minimal & Easy Maintenance
Griffin Filters designs its dust collectors with maintenance in mind. Included in the design are several factors to help minimize downtime and maintenance costs.
Minimal Maintenance
Without internal moving parts, maintenance is kept to a minimum.
Easier Maintenance
Easy bag replacement through top clean air side of the baghouse.
Easy Access
Maintenance platform with access ladder per OSHA safety specifications.
Monitor Baghouse Performance
A provided Magnehelic Gauge allows you to read the differential pressure across the bags. This helps operators identify an issue before it causes serious damage.
Basic Features
- Stock paint colors include tan, white, gray and blue. Custom colors available.
- Standard bags are 16 oz. singed polyester felt, snap-band style. 16 oz. Singed polyester felt bags with snap band top for air tight seal, with many fabric options to choose from.
- Galvanized bag support cages for corrosion protection.
- The jet pulse adjustable timer comes in a weather proof NEMA 4 enclosure.
- Lift-off top access doors
- Magnehelic gauge
- 16 oz. polyester singed bags, 280° F max
- Galvanized steel cages with venturis
- -20" WG construction
- NEMA 4 electricals for continuous pulse cleaning
- Header pipe mounted and tested
- Support steel designed for 90 MPH wind load.
Customizing the Collector through Griffin Options and Accessories assures a collector fitted to your particular needs. Our engineers will gladly work with you in assessing the features controlled by your process and those that are optional.
Optional Features
ACCESSORIES
- Structural support steel for 5' discharge clearance
- Rotary airlock
- Screw conveyor for larger models
- Walkways-upper and lower-with bar grating and ladder
- Walk-in plenumfor changing bags in all weather conditions
- Induced draft fan
- Dampers
- On-line demand cleaning
- Special electrical requirements
- Double dump valves
- Stairway package
- Special discharge clearance
- Hopper level indicators & alarm
- Vibrators
- Hopper aerator pads
- Dust recovery system
- Air compressor
- Motor starters
- Alternate paint colors
- Broken bag detector
- Pleated filters
Process Controlled Features
- Other bag materials--polypropylene, Nomex®, Ryton®, fiberglass, PTFE finishes and more.
- Alternate cage construction: stainless, epoxy coated
- Grounded collector and bags
- Pressure relief doors
- Sprinkler system
- Explosion proof electricals
- Special paints and preparation
- Specialty metals
- Seismic and wind load considerations
- -20" WG design is standard. Higher pressures available.
- Special temperatures
- high temperatures up to 500 °F
- up to 3" insulation
- heater packages